Airbus
aerospace
SkillBridge-GroundTestInspector(A320)
Neural analysis suggests this role is
optimal for Professional candidates.
“SkillBridge - Ground Test Inspector (A320) at Airbus. Skills: Ground Tests, Troubleshooting, Quality Inspection. planning, execution and validation of Ground Tests in the Final Assembly Line. demonstration of conformity within aircraft systems to the design specifications”
What You'll Achieve.
demonstration of conformity within aircraft systems to the design specifications; eliminate any deviations detected; attest the conformity of the aircraft or a major constituent assembly
Industry & Context.
troubleshooting; isolate, document and ultimately eliminate any deviations detected; distinguish error types; clarify problems with the engineering department; identify root cause failure; root cause analysis; Investigation: Test tool failure, A/C equipment failure or A/C installation discrepancy.
Working on jigs at the fuselage at a height of 15 feet., Able to work on hydraulic lifts sometimes at a height of up to 40 feet., Carrying: able to occasionally carry up to 20 lbs., Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time., Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time, Lifting: able to occasionally lift up to 30 lbs., Pushing/Pulling: able to push/pull items in office areas and on the shop floor., Sitting: able to sit for extended periods of time at the computer and in meetings., Squatting/Kneeling: able to occasionally squat or kneel to retrieve or replace items shelved on.
What They're Looking For.
Must Have
Active-duty military with command authorization and within 180 days of separation., Eligible to participate in DoD SkillBridge Program., Ability to successfully complete trainings provided by Airbus, Health & Safety, General aircraft familiarization, Quality Training, Knowledge of station safety, quality (clean as you go / Foreign Object Debris) and OSHA regulations., Keep tools and support equipment in safe operational conditions at all times.
Nice to Have
Training from a vocational school or previous employer in the use of application tools and in application techniques., Experience in A320 Family type rating is beneficial., Experienced in Quality Inspector on avionics systems.
What You'll Do.
planning, execution and validation of Ground Tests in the Final Assembly Line, demonstration of conformity within aircraft systems to the design specifications, initiate actions to isolate, document and ultimately eliminate any deviations detected, Prepare the aircraft and workstation surroundings for ground tests on various avionics and electrical systems, in a safe environment., Perform function tests on all systems (flight controls, navigation, passenger entertainment, etc.
) in parallel to the assembly of the aircraft from beginning to Flight Testing., Organize documentation of any non-conformity in the SAP NC system and initiate associated retests (Repeat Test Instruction) after finalization of rework., Perform troubleshooting on test systems and on aircraft systems., Prepare and coordinate troubleshooting and distinguish error types., Clarify problems with the engineering department, Ensure the safety of people and the aircraft all along the process, until the test closes up., Execute ground test following released documents and their associated work orders based on quality, cost and time., Enter, records the values plotted during the test when measurements are required inside released documents., Identify problems internally in order to continuously improve the “On Time On Quality” production process., Perform and check operational tests and attest the conformity of the aircraft or a major constituent assembly in accordance with released documentation (e.g.
Ground Test Instructions (GTIs), Repeat Test Instructions (RTIs), Retest Sheet, Work Order (WO) )., Perform upload of software equipment on/off aircraft and already installed on aircraft if needed., Extract electrical schematics for troubleshooting and perform specific tests to identify root cause failure., Launch Practical Problem Solving (PPS) for continuous improvements., Perform root cause analysis, if the test result is not compliant with released documents., Investigation: Test tool failure, A/C equipment failure or A/C installation discrepancy., Declaration and follow up of non conformity (e.g.
NC, design deviation, ground test user request,.
) for rework or certification, according to the good procedure.
How You'll Work.
Team & Collaboration
Collaborate with Ground Test Design, Engineering-, Quality- and Shop Floor departments.
Full Job Description
Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at [[email protected]](mailto:[email protected]) * [Notice: Know Your Rights: Workplace Discrimination is Illegal](https://kairosservicesinc.com/wp-content/uploads/2022/11/22-088_EEOC_KnowYourRights.pdf) * [Notice: Pay Transparency Nondiscrimination](https://kairosservicesinc.com/wp-content/uploads/2019/08/PayTransparencyPoster.pdf) (English) * [Aviso: Transparencia en el Pago No Discriminación](https://kairosservicesinc.com/wp-content/uploads/2025/07/federal-contractor-pay-transparency-spanish.pdf) (Spanish) ****Job Description:**** **Avionics Technician-Ground Test Inspector (GTI)** will be responsible for the planning, execution and validation of Ground Tests in the Final Assembly Line. This includes the demonstration of conformity within aircraft systems to the design specifications through attestation in the Airbus Test System (ESAO). Initiate actions to isolate, document and ultimately eliminate any deviations detected. __Airbus is an authorized DoD SkillBridge partner (per DoDI 1322.29). This 180-day program allows transitioning service members to leverage their military technical expertise in a high-precision aerospace environment.__ **SkillBridge Eligibility:** * Active-duty service member within 180 days of separation. * Written Commander (O-4 or above) authorization. * Must have current work authorization for U.S. positions. **Meet the Team:** The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along with three production lines for the A220 and A320 Family aircraft. On the shop floor you’ll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. **Your worki
Applying for this SkillBridge - Ground Test Inspector (A320) role?
Most applicants get filtered before a human reads their resume. See if yours makes the cut.
How to Apply on Workday
- Workday has a multi-step form — save your progress after every section.
- "Apply With LinkedIn" can fail or lose data; manual entry is more reliable.
- Watch for the "Submit for Review" final step — hitting "Save" alone does not submit.
- Job requisition numbers are useful when following up with HR by email.
ANONYMOUS · UNFILTERED
What do employees actually say about Airbus?
Real rants from real employees. Read before you apply.