Otis
elevator and escalator manufacturing, installation, and service
Adjuster
Neural analysis suggests this role is
optimal for Mid+ candidates.
“Adjuster at Otis. Skills: Elevator and escalator adjustment, Safety procedures, Quality control. Conducting safety checks. Performing cleaning, lubrication, and testing of equipment”
Industry & Context.
Correcting over balance in the counterweights; Adjusting final limits; Ensuring no obstructions that might damage steps or handrails
Travel to client sites
What They're Looking For.
Must Have
Conducts safety checks at all points before initiating job at the client site., Performs the cleaning, lubrication and testing of the over speed governor., Checks the static balancing of the units, correcting over balance in the counterweights and adjusting final limits, under the guidance of a Senior Adjustor/Adjustor., Lubricates the Safety Action Mechanism and tests it according to the defined procedures., Performs under guidance the installation of door skates and sets door locks after driving the product through inspection mode and stopping at every landing and checking all bolts and fasteners for correct tightness., Performs unit safety check by travelling the car top through the shaft checking interference between moving parts, cabin, counterweight or any other piece of equipment., Checks all electrical operation of unit including car door, buttons and intercom., Escalates concerns at job sites to the Supervisor including filling out the NCR, process infractions and safety issues., Sets all contact parameters in the controller and puts the lift in normal operation., Adjusts the acceleration and deceleration and ride quality as per OTIS recommended standards in manual., Inspects the motor pit and escalator steps for any construction debris and cleans them, if necessary, as per the safety guidelines., Tests the escalator by removing the comb at both ends plates and hand, winds the motor for one complete cycle of travel to ensure there are no obstructions that might damage the steps or handrails., Prepares the new installation inspection report, field test data report, safety check report and Otis safety audit.
What You'll Do.
Conducting safety checks
and testing of equipment
Checking and correcting static balancing
Lubricating and testing safety mechanisms
Performing installation tasks
Conducting unit safety checks
Checking electrical operations
Escalating concerns and filling out reports
Setting controller parameters
Adjusting acceleration
Inspecting and cleaning equipment areas
Testing escalators for obstructions
Preparing inspection and test reports
How You'll Work.
Team & Collaboration
Working under the guidance of a Senior Adjustor/Adjustor; Escalating concerns to the Supervisor
Communication Scope
Escalates concerns at job sites to the Supervisor
Full Job Description
**Date Posted:** 2026-01-14 **Country:** United Arab Emirates **Location:** Otis L.L.C, 37th floor, The One Tower, Sheikh Zayed Road, Dubai, United Arab Emirates **Job Description:** **Key Responsibilities** * Conducts safety checks at all points before initiating job at the client site. * Performs the cleaning, lubrication and testing of the over speed governor. * Checks the static balancing of the units, correcting over balance in the counterweights and adjusting final limits, under the guidance of a Senior Adjustor/Adjustor. * Lubricates the Safety Action Mechanism and tests it according to the defined procedures. * Performs under guidance the installation of door skates and sets door locks after driving the product through inspection mode and stopping at every landing and checking all bolts and fasteners for correct tightness. * Performs unit safety check by travelling the car top through the shaft checking interference between moving parts, cabin, counterweight or any other piece of equipment. * Checks all electrical operation of unit including car door, buttons and intercom. * Escalates concerns at job sites to the Supervisor including filling out the NCR, process infractions and safety issues. * Sets all contact parameters in the controller and puts the lift in normal operation. * Adjusts the acceleration and deceleration and ride quality as per OTIS recommended standards in manual. * Inspects the motor pit and escalator steps for any construction debris and cleans them, if necessary, as per the safety guidelines. * Tests the escalator by removing the comb at both ends plates and hand, winds the motor for one complete cycle of travel to ensure there are no obstructions that might damage the steps or handrails. * Prepares the new installation inspection report, field test data report, safety check report and Otis safety audit. If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day. Otis is the world’s leading
Applying for this Adjuster role?
Most applicants get filtered before a human reads their resume. See if yours makes the cut.
How to Apply on Workday
- Workday has a multi-step form — save your progress after every section.
- "Apply With LinkedIn" can fail or lose data; manual entry is more reliable.
- Watch for the "Submit for Review" final step — hitting "Save" alone does not submit.
- Job requisition numbers are useful when following up with HR by email.
ANONYMOUS · UNFILTERED
What do employees actually say about Otis?
Real rants from real employees. Read before you apply.